Продукция

HD polyethylene

High Density Polyethylene as per GOST Standard 16338-85.

ParameterExtrudingMolding
Melt flow index g/10 min 0,9 5,3
Density kg/m3 942 947
Tension yield point MPa 21,3 23,6
Tensile stress at break MPa 19,8 22,4
Breaking elongation % 354 318
Filtration 150μM 150μM
Colour T/transparent Khaki
Feedstock Plastic sheet PET bottle top

LD polyethylene

Low Density Polyethylene as per GOST Standard 16337-77.

ParameterExtruding 1Extruding 2
Melt flow index g/10 min 0,6 3,2
Density kg/m3 923 915
Tension yield point MPa 10,8 10,1
Tensile stress at break MPa 10,3 11,3
Breaking elongation % 450 420
Filtration 150μM 150μM
Colour T/transparent Black
Feedstock Plastic sheet Pipe

Polypropylene

Polypropylene analog 21030 as per GOST 26996-86:

ParameterPP by "Polypepp" LLCAs per GOST
Melt flow index g/10 min 3,5-4,0 2,4-4,0
Tensile stress at break MPa 34,7 35
Tension yield point MPa 28,9 32
Breaking elongation % 160 200
Density kg/m3 907 910

Polypropylene

Polypropylene analog 21060 as per GOST 26996-86:

ParameterPP by "Polypepp" LLCAs per GOST
Melt flow index g/10 min 4,5-7,8 4,0-8,0
Tensile stress at break MPa 29,4 30
Tension yield point MPa 30,8 32
Breaking elongation % 82 100
Density kg/m3 908 910
According to customer's performance specification, we are capable of polyethylenes modifying by means of different chemical additives, colorants, and additives by leading global producers.
Thank. We will contact you soon.